operation namespace¶

namespace operation¶

Coordinate operations (relationship between any two coordinate reference systems).

osgeo.proj.operation namespace

This covers Conversion, Transformation, PointMotionOperation or ConcatenatedOperation.

Typedefs

typedef std::shared_ptr<CoordinateOperation> CoordinateOperationPtr¶: Shared pointer of CoordinateOperation

typedef util::nn<CoordinateOperationPtr> CoordinateOperationNNPtr¶: Non-null shared pointer of CoordinateOperation

using GeneralOperationParameterPtr = std::shared_ptr<GeneralOperationParameter>¶: Shared pointer of GeneralOperationParameter

using GeneralOperationParameterNNPtr = util::nn<GeneralOperationParameterPtr>¶: Non-null shared pointer of GeneralOperationParameter

using OperationParameterPtr = std::shared_ptr<OperationParameter>¶: Shared pointer of OperationParameter

using OperationParameterNNPtr = util::nn<OperationParameterPtr>¶: Non-null shared pointer of OperationParameter

using GeneralParameterValuePtr = std::shared_ptr<GeneralParameterValue>¶: Shared pointer of GeneralParameterValue

using GeneralParameterValueNNPtr = util::nn<GeneralParameterValuePtr>¶: Non-null shared pointer of GeneralParameterValue

using ParameterValuePtr = std::shared_ptr<ParameterValue>¶: Shared pointer of ParameterValue

using ParameterValueNNPtr = util::nn<ParameterValuePtr>¶: Non-null shared pointer of ParameterValue

using OperationParameterValuePtr = std::shared_ptr<OperationParameterValue>¶: Shared pointer of OperationParameterValue

using OperationParameterValueNNPtr = util::nn<OperationParameterValuePtr>¶: Non-null shared pointer of OperationParameterValue

using OperationMethodPtr = std::shared_ptr<OperationMethod>¶: Shared pointer of OperationMethod

using OperationMethodNNPtr = util::nn<OperationMethodPtr>¶: Non-null shared pointer of OperationMethod

using SingleOperationPtr = std::shared_ptr<SingleOperation>¶: Shared pointer of SingleOperation

using SingleOperationNNPtr = util::nn<SingleOperationPtr>¶: Non-null shared pointer of SingleOperation

typedef std::shared_ptr<Conversion> ConversionPtr¶: Shared pointer of Conversion

typedef util::nn<ConversionPtr> ConversionNNPtr¶: Non-null shared pointer of Conversion

using TransformationPtr = std::shared_ptr<Transformation>¶: Shared pointer of Transformation

using TransformationNNPtr = util::nn<TransformationPtr>¶: Non-null shared pointer of Transformation

using PointMotionOperationPtr = std::shared_ptr<PointMotionOperation>¶: Shared pointer of PointMotionOperation

using PointMotionOperationNNPtr = util::nn<PointMotionOperationPtr>¶: Non-null shared pointer of PointMotionOperation

using ConcatenatedOperationPtr = std::shared_ptr<ConcatenatedOperation>¶: Shared pointer of ConcatenatedOperation

using ConcatenatedOperationNNPtr = util::nn<ConcatenatedOperationPtr>¶: Non-null shared pointer of ConcatenatedOperation

using CoordinateOperationContextPtr = std::unique_ptr<CoordinateOperationContext>¶: Unique pointer of CoordinateOperationContext

using CoordinateOperationContextNNPtr = util::nn<CoordinateOperationContextPtr>¶: Non-null unique pointer of CoordinateOperationContext

using CoordinateOperationFactoryPtr = std::unique_ptr<CoordinateOperationFactory>¶: Unique pointer of CoordinateOperationFactory

using CoordinateOperationFactoryNNPtr = util::nn<CoordinateOperationFactoryPtr>¶: Non-null unique pointer of CoordinateOperationFactory

class ConcatenatedOperation : public osgeo::proj::operation::CoordinateOperation ¶

#include <coordinateoperation.hpp>

An ordered sequence of two or more single coordinate operations (SingleOperation).

The sequence of coordinate operations is constrained by the requirement that the source coordinate reference system of step n+1 shall be the same as the target coordinate reference system of step n.

Remark: Implements ConcatenatedOperation from ISO_19111_2018

Public Functions

const std::vector<CoordinateOperationNNPtr> &operations() const¶

Return the operation steps of the concatenated operation.

Return: the operation steps.

CoordinateOperationNNPtr inverse() const¶

Return the inverse of the coordinate operation.

Exceptions

util::UnsupportedOperationException:

bool isEquivalentTo(const util::IComparable *other, util::IComparable::Criterion criterion = util::IComparable::Criterion::STRICT) const¶

Returns whether an object is equivalent to another one.

Return

true if objects are equivalent.

Parameters

other: other object to compare to
criterion: comparaison criterion.

std::set<GridDescription> gridsNeeded(const io::DatabaseContextPtr &databaseContext) const¶: Return grids needed by an operation.

Public Static Functions

ConcatenatedOperationNNPtr create(const util::PropertyMap &properties, const std::vector<CoordinateOperationNNPtr> &operationsIn, const std::vector<metadata::PositionalAccuracyNNPtr> &accuracies)¶

Instanciate a ConcatenatedOperation.

Return

new Transformation.

Parameters

properties: See general_properties. At minimum the name should be defined.
operationsIn: Vector of the CoordinateOperation steps.
accuracies: Vector of positional accuracy (might be empty).

Exceptions

InvalidOperation:

CoordinateOperationNNPtr createComputeMetadata(const std::vector<CoordinateOperationNNPtr> &operationsIn, bool checkExtent)¶

Instanciate a ConcatenatedOperation, or return a single coordinate operation.

This computes its accuracy from the sum of its member operations, its extent

Parameters

operationsIn: Vector of the CoordinateOperation steps.
checkExtent: Whether we should check the non-emptyness of the intersection of the extents of the operations

Exceptions

InvalidOperation:

class Conversion : public osgeo::proj::operation::SingleOperation ¶

#include <coordinateoperation.hpp>

A mathematical operation on coordinates in which the parameter values are defined rather than empirically derived.

Application of the coordinate conversion introduces no error into output coordinates. The best-known example of a coordinate conversion is a map projection. For coordinate conversions the output coordinates are referenced to the same datum as are the input coordinates.

Coordinate conversions forming a component of a derived CRS have a source crs::CRS and a target crs::CRS that are NOT specified through the source and target associations, but through associations from crs::DerivedCRS to crs::SingleCRS.

Remark: Implements Conversion from ISO_19111_2018

Public Functions

CoordinateOperationNNPtr inverse() const¶

Return the inverse of the coordinate operation.

Exceptions

util::UnsupportedOperationException:

bool isUTM(int &zone, bool &north) const¶

Return whether a conversion is a Universal Transverse Mercator conversion.

Return

true if it is a UTM conversion.

Parameters

zone: UTM zone number between 1 and 60.
north: true for UTM northern hemisphere, false for UTM southern hemisphere.

ConversionNNPtr identify() const¶

Return a Conversion object where some parameters are better identified.

Return: a new Conversion.

Public Static Functions

ConversionNNPtr create(const util::PropertyMap &properties, const OperationMethodNNPtr &methodIn, const std::vector<GeneralParameterValueNNPtr> &values)¶

Instanciate a Conversion from a vector of GeneralParameterValue.

Return

a new Conversion.

Parameters

properties: See general_properties. At minimum the name should be defined.
methodIn: the operation method.
values: the values.

Exceptions

InvalidOperation:

ConversionNNPtr create(const util::PropertyMap &propertiesConversion, const util::PropertyMap &propertiesOperationMethod, const std::vector<OperationParameterNNPtr> &parameters, const std::vector<ParameterValueNNPtr> &values)¶

Instanciate a Conversion and its OperationMethod.

Return

a new Conversion.

Parameters

propertiesConversion: See general_properties of the conversion. At minimum the name should be defined.
propertiesOperationMethod: See general_properties of the operation method. At minimum the name should be defined.
parameters: the operation parameters.
values: the operation values. Constraint: values.size() == parameters.size()

Exceptions

InvalidOperation:

ConversionNNPtr createUTM(const util::PropertyMap &properties, int zone, bool north)¶

Instanciate a Universal Transverse Mercator conversion.

UTM is a family of conversions, of EPSG codes from 16001 to 16060 for the northern hemisphere, and 17001 t 17060 for the southern hemisphere, based on the Transverse Mercator projection method.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
zone: UTM zone number between 1 and 60.
north: true for UTM northern hemisphere, false for UTM southern hemisphere.

ConversionNNPtr createTransverseMercator(const util::PropertyMap &properties, const common::Angle &centerLat, const common::Angle &centerLong, const common::Scale &scale, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Transverse Mercator projection method.

This method is defined as EPSG:9807

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLat: See Latitude of natural origin/Center Latitude
centerLong: See Longitude of natural origin/Central Meridian
scale: See Scale Factor
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createGaussSchreiberTransverseMercator(const util::PropertyMap &properties, const common::Angle &centerLat, const common::Angle &centerLong, const common::Scale &scale, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Gauss Schreiber Transverse Mercator projection method.

This method is also known as Gauss-Laborde Reunion.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLat: See Latitude of natural origin/Center Latitude
centerLong: See Longitude of natural origin/Central Meridian
scale: See Scale Factor
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createTransverseMercatorSouthOriented(const util::PropertyMap &properties, const common::Angle &centerLat, const common::Angle &centerLong, const common::Scale &scale, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Transverse Mercator South Orientated projection method.

This method is defined as EPSG:9808

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLat: See Latitude of natural origin/Center Latitude
centerLong: See Longitude of natural origin/Central Meridian
scale: See Scale Factor
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createTwoPointEquidistant(const util::PropertyMap &properties, const common::Angle &latitudeFirstPoint, const common::Angle &longitudeFirstPoint, const common::Angle &latitudeSecondPoint, const common::Angle &longitudeSeconPoint, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Two Point Equidistant projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
latitudeFirstPoint: Latitude of first point.
longitudeFirstPoint: Longitude of first point.
latitudeSecondPoint: Latitude of second point.
longitudeSeconPoint: Longitude of second point.
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createTunisiaMappingGrid(const util::PropertyMap &properties, const common::Angle &centerLat, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Tunisia Mapping Grid projection method.

This method is defined as EPSG:9816

Note

There is currently no implementation of the method formulas in PROJ.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLat: See Latitude of natural origin/Center Latitude
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createAlbersEqualArea(const util::PropertyMap &properties, const common::Angle &latitudeFalseOrigin, const common::Angle &longitudeFalseOrigin, const common::Angle &latitudeFirstParallel, const common::Angle &latitudeSecondParallel, const common::Length &eastingFalseOrigin, const common::Length &eastingNorthOrigin)¶

Instanciate a conversion based on the Albers Conic Equal Area projection method.

This method is defined as EPSG:9822

Note

the order of arguments is conformant with the corresponding EPSG mode and different than OGRSpatialReference::setACEA() of GDAL <= 2.3

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
latitudeFalseOrigin: See Latitude of false origin
longitudeFalseOrigin: See Longitude of false origin
latitudeFirstParallel: See Latitude of 1st standard parallel
latitudeSecondParallel: See Latitude of 2nd standard parallel
eastingFalseOrigin: See Easting of false origin
northingFalseOrigin: See Northing of false origin

ConversionNNPtr createLambertConicConformal_1SP(const util::PropertyMap &properties, const common::Angle &centerLat, const common::Angle &centerLong, const common::Scale &scale, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Lambert Conic Conformal 1SP projection method.

This method is defined as EPSG:9801

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLat: See Latitude of natural origin/Center Latitude
centerLong: See Longitude of natural origin/Central Meridian
scale: See Scale Factor
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createLambertConicConformal_2SP(const util::PropertyMap &properties, const common::Angle &latitudeFalseOrigin, const common::Angle &longitudeFalseOrigin, const common::Angle &latitudeFirstParallel, const common::Angle &latitudeSecondParallel, const common::Length &eastingFalseOrigin, const common::Length &eastingNorthOrigin)¶

Instanciate a conversion based on the Lambert Conic Conformal (2SP) projection method.

This method is defined as EPSG:9802

Note

the order of arguments is conformant with the corresponding EPSG mode and different than OGRSpatialReference::setLCC() of GDAL <= 2.3

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
latitudeFalseOrigin: See Latitude of false origin
longitudeFalseOrigin: See Longitude of false origin
latitudeFirstParallel: See Latitude of 1st standard parallel
latitudeSecondParallel: See Latitude of 2nd standard parallel
eastingFalseOrigin: See Easting of false origin
northingFalseOrigin: See Northing of false origin

ConversionNNPtr createLambertConicConformal_2SP_Michigan(const util::PropertyMap &properties, const common::Angle &latitudeFalseOrigin, const common::Angle &longitudeFalseOrigin, const common::Angle &latitudeFirstParallel, const common::Angle &latitudeSecondParallel, const common::Length &eastingFalseOrigin, const common::Length &eastingNorthOrigin, const common::Scale &ellipsoidScalingFactor)¶

Instanciate a conversion based on the Lambert Conic Conformal (2SP Michigan) projection method.

This method is defined as EPSG:1051

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
latitudeFalseOrigin: See Latitude of false origin
longitudeFalseOrigin: See Longitude of false origin
latitudeFirstParallel: See Latitude of 1st standard parallel
latitudeSecondParallel: See Latitude of 2nd standard parallel
eastingFalseOrigin: See Easting of false origin
northingFalseOrigin: See Northing of false origin
ellipsoidScalingFactor: Ellipsoid scaling factor.

ConversionNNPtr createLambertConicConformal_2SP_Belgium(const util::PropertyMap &properties, const common::Angle &latitudeFalseOrigin, const common::Angle &longitudeFalseOrigin, const common::Angle &latitudeFirstParallel, const common::Angle &latitudeSecondParallel, const common::Length &eastingFalseOrigin, const common::Length &eastingNorthOrigin)¶

Instanciate a conversion based on the Lambert Conic Conformal (2SP Belgium) projection method.

This method is defined as EPSG:9803

Warning

The formulas used currently in PROJ are, incorrectly, the ones of the regular LCC_2SP method.

Note

the order of arguments is conformant with the corresponding EPSG mode and different than OGRSpatialReference::setLCCB() of GDAL <= 2.3

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
latitudeFalseOrigin: See Latitude of false origin
longitudeFalseOrigin: See Longitude of false origin
latitudeFirstParallel: See Latitude of 1st standard parallel
latitudeSecondParallel: See Latitude of 2nd standard parallel
eastingFalseOrigin: See Easting of false origin
northingFalseOrigin: See Northing of false origin

ConversionNNPtr createAzimuthalEquidistant(const util::PropertyMap &properties, const common::Angle &latitudeNatOrigin, const common::Angle &longitudeNatOrigin, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Modified Azimuthal Equidistant projection method.

This method is defined as EPSG:9832

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
latitudeNatOrigin: See Latitude of natural origin/Center Latitude
longitudeNatOrigin: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createGuamProjection(const util::PropertyMap &properties, const common::Angle &latitudeNatOrigin, const common::Angle &longitudeNatOrigin, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Guam Projection projection method.

This method is defined as EPSG:9831

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
latitudeNatOrigin: See Latitude of natural origin/Center Latitude
longitudeNatOrigin: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createBonne(const util::PropertyMap &properties, const common::Angle &latitudeNatOrigin, const common::Angle &longitudeNatOrigin, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Bonne projection method.

This method is defined as EPSG:9827

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
latitudeNatOrigin: See Latitude of natural origin/Center Latitude . PROJ calls its the standard parallel 1.
longitudeNatOrigin: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createLambertCylindricalEqualAreaSpherical(const util::PropertyMap &properties, const common::Angle &latitudeFirstParallel, const common::Angle &longitudeNatOrigin, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Lambert Cylindrical Equal Area (Spherical) projection method.

This method is defined as EPSG:9834

Warning

The PROJ cea computation code would select the ellipsoidal form if a non-spherical ellipsoid is used for the base GeographicalCRS.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
latitudeFirstParallel: See Latitude of 1st standard parallel.
longitudeNatOrigin: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createLambertCylindricalEqualArea(const util::PropertyMap &properties, const common::Angle &latitudeFirstParallel, const common::Angle &longitudeNatOrigin, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Lambert Cylindrical Equal Area (ellipsoidal form) projection method.

This method is defined as EPSG:9835

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
latitudeFirstParallel: See Latitude of 1st standard parallel.
longitudeNatOrigin: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createCassiniSoldner(const util::PropertyMap &properties, const common::Angle &centerLat, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Cassini-Soldner projection method.

This method is defined as EPSG:9806

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLat: See Latitude of natural origin/Center Latitude
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createEquidistantConic(const util::PropertyMap &properties, const common::Angle &centerLat, const common::Angle &centerLong, const common::Angle &latitudeFirstParallel, const common::Angle &latitudeSecondParallel, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Equidistant Conic projection method.

There is no equivalent in EPSG.

Note

Although not found in EPSG, the order of arguments is conformant with the “spirit” of EPSG and different than OGRSpatialReference::setEC() of GDAL <= 2.3 *

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLat: See Latitude of natural origin/Center Latitude
centerLong: See Longitude of natural origin/Central Meridian
latitudeFirstParallel: See Latitude of 1st standard parallel
latitudeSecondParallel: See Latitude of 2nd standard parallel
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createEckertI(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Eckert I projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createEckertII(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Eckert II projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createEckertIII(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Eckert III projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createEckertIV(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Eckert IV projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createEckertV(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Eckert V projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createEckertVI(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Eckert VI projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createEquidistantCylindrical(const util::PropertyMap &properties, const common::Angle &latitudeFirstParallel, const common::Angle &longitudeNatOrigin, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Equidistant Cylindrical projection method.

This is also known as the Equirectangular method, and in the particular case where the latitude of first parallel is 0.

This method is defined as EPSG:1028

Note

This is the equivalent OGRSpatialReference::SetEquirectangular2( 0.0, latitudeFirstParallel, falseEasting, falseNorthing ) of GDAL <= 2.3, where the lat_0 / center_latitude parameter is forced to 0.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
latitudeFirstParallel: See Latitude of 1st standard parallel.
longitudeNatOrigin: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createEquidistantCylindricalSpherical(const util::PropertyMap &properties, const common::Angle &latitudeFirstParallel, const common::Angle &longitudeNatOrigin, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Equidistant Cylindrical (Spherical) projection method.

This is also known as the Equirectangular method, and in the particular case where the latitude of first parallel is 0.

This method is defined as EPSG:1029

Note

This is the equivalent OGRSpatialReference::SetEquirectangular2( 0.0, latitudeFirstParallel, falseEasting, falseNorthing ) of GDAL <= 2.3, where the lat_0 / center_latitude parameter is forced to 0.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
latitudeFirstParallel: See Latitude of 1st standard parallel.
longitudeNatOrigin: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createGall(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Gall (Stereographic) projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createGoodeHomolosine(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Goode Homolosine projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createInterruptedGoodeHomolosine(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Interrupted Goode Homolosine projection method.

There is no equivalent in EPSG.

Note

OGRSpatialReference::SetIGH() of GDAL <= 2.3 assumes the 3 projection parameters to be zero and this is the nominal case.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createGeostationarySatelliteSweepX(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &height, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Geostationary Satellite View projection method, with the sweep angle axis of the viewing instrument being x.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
height: Height of the view point above the Earth.
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createGeostationarySatelliteSweepY(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &height, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Geostationary Satellite View projection method, with the sweep angle axis of the viewing instrument being y.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
height: Height of the view point above the Earth.
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createGnomonic(const util::PropertyMap &properties, const common::Angle &centerLat, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Gnomonic projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLat: See Latitude of natural origin/Center Latitude
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createHotineObliqueMercatorVariantA(const util::PropertyMap &properties, const common::Angle &latitudeProjectionCentre, const common::Angle &longitudeProjectionCentre, const common::Angle &azimuthInitialLine, const common::Angle &angleFromRectifiedToSkrewGrid, const common::Scale &scale, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Hotine Oblique Mercator (Variant A) projection method.

This is the variant with the no_uoff parameter, which corresponds to GDAL >=2.3 Hotine_Oblique_Mercator projection. In this variant, the false grid coordinates are defined at the intersection of the initial line and the aposphere (the equator on one of the intermediate surfaces inherent in the method), that is at the natural origin of the coordinate system).

This method is defined as EPSG:9812

Note

In the case where azimuthInitialLine = angleFromRectifiedToSkrewGrid = 90deg, this maps to the Swiss Oblique Mercator formulas.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
latitudeProjectionCentre: See Latitute of projection centre
longitudeProjectionCentre: See Longitude of projection centre
azimuthInitialLine: See Azimuth of initial line
angleFromRectifiedToSkrewGrid: See Angle from Rectified to Skew Grid
scale: See Scale factor on initial line
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createHotineObliqueMercatorVariantB(const util::PropertyMap &properties, const common::Angle &latitudeProjectionCentre, const common::Angle &longitudeProjectionCentre, const common::Angle &azimuthInitialLine, const common::Angle &angleFromRectifiedToSkrewGrid, const common::Scale &scale, const common::Length &eastingProjectionCentre, const common::Length &northingProjectionCentre)¶

Instanciate a conversion based on the Hotine Oblique Mercator (Variant B) projection method.

This is the variant without the no_uoff parameter, which corresponds to GDAL >=2.3 Hotine_Oblique_Mercator_Azimuth_Center projection. In this variant, the false grid coordinates are defined at the projection centre.

This method is defined as EPSG:9815

Note

In the case where azimuthInitialLine = angleFromRectifiedToSkrewGrid = 90deg, this maps to the Swiss Oblique Mercator formulas.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
latitudeProjectionCentre: See Latitute of projection centre
longitudeProjectionCentre: See Longitude of projection centre
azimuthInitialLine: See Azimuth of initial line
angleFromRectifiedToSkrewGrid: See Angle from Rectified to Skew Grid
scale: See Scale factor on initial line
eastingProjectionCentre: See Easting at projection centre
northingProjectionCentre: See Northing at projection centre

ConversionNNPtr createHotineObliqueMercatorTwoPointNaturalOrigin(const util::PropertyMap &properties, const common::Angle &latitudeProjectionCentre, const common::Angle &latitudePoint1, const common::Angle &longitudePoint1, const common::Angle &latitudePoint2, const common::Angle &longitudePoint2, const common::Scale &scale, const common::Length &eastingProjectionCentre, const common::Length &northingProjectionCentre)¶

Instanciate a conversion based on the Hotine Oblique Mercator Two Point Natural Origin projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
latitudeProjectionCentre: See Latitute of projection centre
latitudePoint1: Latitude of point 1.
longitudePoint1: Latitude of point 1.
latitudePoint2: Latitude of point 2.
longitudePoint2: Longitude of point 2.
scale: See Scale factor on initial line
eastingProjectionCentre: See Easting at projection centre
northingProjectionCentre: See Northing at projection centre

ConversionNNPtr createInternationalMapWorldPolyconic(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Angle &latitudeFirstParallel, const common::Angle &latitudeSecondParallel, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the International Map of the World Polyconic projection method.

There is no equivalent in EPSG.

Note

the order of arguments is conformant with the corresponding EPSG mode and different than OGRSpatialReference::SetIWMPolyconic() of GDAL <= 2.3

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
latitudeFirstParallel: See Latitude of 1st standard parallel
latitudeSecondParallel: See Latitude of 2nd standard parallel
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createKrovakNorthOriented(const util::PropertyMap &properties, const common::Angle &latitudeProjectionCentre, const common::Angle &longitudeOfOrigin, const common::Angle &colatitudeConeAxis, const common::Angle &latitudePseudoStandardParallel, const common::Scale &scaleFactorPseudoStandardParallel, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Krovak (north oriented) projection method.

This method is defined as EPSG:1041

The coordinates are returned in the “GIS friendly” order: easting, northing. This method is similar to createKrovak(), except that the later returns projected values as southing, westing, where southing(Krovak) = -northing(Krovak_North) and westing(Krovak) = -easting(Krovak_North).

Note

The current PROJ implementation of Krovak hard-codes colatitudeConeAxis = 30deg17‘17.30311” and latitudePseudoStandardParallel = 78deg30’N, which are the values used for the ProjectedCRS S-JTSK (Ferro) / Krovak East North (EPSG:5221). It also hard-codes the parameters of the Bessel ellipsoid typically used for Krovak.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
latitudeProjectionCentre: See Latitute of projection centre
longitudeOfOrigin: See Longitude of origin
colatitudeConeAxis: See Co-latitude of cone axis
latitudePseudoStandardParallel: See Latitude of pseudo standard
scaleFactorPseudoStandardParallel: See Scale factor on pseudo
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createKrovak(const util::PropertyMap &properties, const common::Angle &latitudeProjectionCentre, const common::Angle &longitudeOfOrigin, const common::Angle &colatitudeConeAxis, const common::Angle &latitudePseudoStandardParallel, const common::Scale &scaleFactorPseudoStandardParallel, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Krovak projection method.

This method is defined as EPSG:9819

The coordinates are returned in the historical order: southing, westing This method is similar to createKrovakNorthOriented(), except that the later returns projected values as easting, northing, where easting(Krovak_North) = -westing(Krovak) and northing(Krovak_North) = -southing(Krovak).

Note

The current PROJ implementation of Krovak hard-codes colatitudeConeAxis = 30deg17‘17.30311” and latitudePseudoStandardParallel = 78deg30’N, which are the values used for the ProjectedCRS S-JTSK (Ferro) / Krovak East North (EPSG:5221). It also hard-codes the parameters of the Bessel ellipsoid typically used for Krovak.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
latitudeProjectionCentre: See Latitute of projection centre
longitudeOfOrigin: See Longitude of origin
colatitudeConeAxis: See Co-latitude of cone axis
latitudePseudoStandardParallel: See Latitude of pseudo standard
scaleFactorPseudoStandardParallel: See Scale factor on pseudo
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createLambertAzimuthalEqualArea(const util::PropertyMap &properties, const common::Angle &latitudeNatOrigin, const common::Angle &longitudeNatOrigin, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Lambert Azimuthal Equal Area projection method.

This method is defined as EPSG:9820

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
latitudeNatOrigin: See Latitude of natural origin/Center Latitude
longitudeNatOrigin: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createMillerCylindrical(const util::PropertyMap &properties, const common::Angle &centerLat, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Miller Cylindrical projection method.

There is no equivalent in EPSG. *

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLat: See Latitude of natural origin/Center Latitude
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createMercatorVariantA(const util::PropertyMap &properties, const common::Angle &centerLat, const common::Angle &centerLong, const common::Scale &scale, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Mercator projection method.

This is the variant, also known as Mercator (1SP), defined with the scale factor. Note that latitude of natural origin (centerLat) is a parameter, but unused in the transformation formulas.

This method is defined as EPSG:9804

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLat: See Latitude of natural origin/Center Latitude . Should be 0.
centerLong: See Longitude of natural origin/Central Meridian
scale: See Scale Factor
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createMercatorVariantB(const util::PropertyMap &properties, const common::Angle &latitudeFirstParallel, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Mercator projection method.

This is the variant, also known as Mercator (2SP), defined with the latitude of the first standard parallel (the second standard parallel is implicitly the opposite value). The latitude of natural origin is fixed to zero.

This method is defined as EPSG:9805

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
latitudeFirstParallel: See Latitude of 1st standard parallel
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createPopularVisualisationPseudoMercator(const util::PropertyMap &properties, const common::Angle &centerLat, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Popular Visualisation Pseudo Mercator projection method.

Also known as WebMercator. Mostly/only used for Projected CRS EPSG:3857 (WGS 84 / Pseudo-Mercator)

This method is defined as EPSG:1024

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLat: See Latitude of natural origin/Center Latitude . Usually 0
centerLong: See Longitude of natural origin/Central Meridian . Usually 0
falseEasting: See False Easting . Usually 0
falseNorthing: See False Northing . Usually 0

ConversionNNPtr createMollweide(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Mollweide projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createNewZealandMappingGrid(const util::PropertyMap &properties, const common::Angle &centerLat, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the New Zealand Map Grid projection method.

This method is defined as EPSG:9811

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLat: See Latitude of natural origin/Center Latitude
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createObliqueStereographic(const util::PropertyMap &properties, const common::Angle &centerLat, const common::Angle &centerLong, const common::Scale &scale, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Oblique Stereographic (Alternative) projection method.

This method is defined as EPSG:9809

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLat: See Latitude of natural origin/Center Latitude
centerLong: See Longitude of natural origin/Central Meridian
scale: See Scale Factor
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createOrthographic(const util::PropertyMap &properties, const common::Angle &centerLat, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Orthographic projection method.

This method is defined as EPSG:9840

Note

At the time of writing, PROJ only implements the spherical formulation

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLat: See Latitude of natural origin/Center Latitude
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createAmericanPolyconic(const util::PropertyMap &properties, const common::Angle &centerLat, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the American Polyconic projection method.

This method is defined as EPSG:9818

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLat: See Latitude of natural origin/Center Latitude
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createPolarStereographicVariantA(const util::PropertyMap &properties, const common::Angle &centerLat, const common::Angle &centerLong, const common::Scale &scale, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Polar Stereographic (Variant A) projection method.

This method is defined as EPSG:9810

This is the variant of polar stereographic defined with a scale factor.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLat: See Latitude of natural origin/Center Latitude . Should be 90 deg ou -90 deg.
centerLong: See Longitude of natural origin/Central Meridian
scale: See Scale Factor
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createPolarStereographicVariantB(const util::PropertyMap &properties, const common::Angle &latitudeStandardParallel, const common::Angle &longitudeOfOrigin, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Polar Stereographic (Variant B) projection method.

This method is defined as EPSG:9829

This is the variant of polar stereographic defined with a latitude of standard parallel.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
latitudeStandardParallel: See Latitude of standard parallel
longitudeOfOrigin: See Longitude of origin
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createRobinson(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Robinson projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createSinusoidal(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Sinusoidal projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createStereographic(const util::PropertyMap &properties, const common::Angle &centerLat, const common::Angle &centerLong, const common::Scale &scale, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Stereographic projection method.

There is no equivalent in EPSG. This method implements the original “Oblique

Stereographic” method described in “Snyder’s Map Projections - A Working

manual”, which is different from the “Oblique Stereographic (alternative”) method implemented in

createObliqueStereographic().

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLat: See Latitude of natural origin/Center Latitude
centerLong: See Longitude of natural origin/Central Meridian
scale: See Scale Factor
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createVanDerGrinten(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Van der Grinten projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createWagnerI(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Wagner I projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createWagnerII(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Wagner II projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createWagnerIII(const util::PropertyMap &properties, const common::Angle &latitudeTrueScale, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Wagner III projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
latitudeTrueScale: Latitude of true scale.
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createWagnerIV(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Wagner IV projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createWagnerV(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Wagner V projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createWagnerVI(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Wagner VI projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createWagnerVII(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Wagner VII projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createQuadrilateralizedSphericalCube(const util::PropertyMap &properties, const common::Angle &centerLat, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Quadrilateralized Spherical Cube projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLat: See Latitude of natural origin/Center Latitude
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createSphericalCrossTrackHeight(const util::PropertyMap &properties, const common::Angle &pegPointLat, const common::Angle &pegPointLong, const common::Angle &pegPointHeading, const common::Length &pegPointHeight)¶

Instanciate a conversion based on the Spherical Cross-Track Height projection method.

There is no equivalent in EPSG.

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
pegPointLat: Peg point latitude.
pegPointLong: Peg point longitude.
pegPointHeading: Peg point heading.
pegPointHeight: Peg point height.

ConversionNNPtr createEqualEarth(const util::PropertyMap &properties, const common::Angle &centerLong, const common::Length &falseEasting, const common::Length &falseNorthing)¶

Instanciate a conversion based on the Equal Earth projection method.

This method is defined as EPSG:1078

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
centerLong: See Longitude of natural origin/Central Meridian
falseEasting: See False Easting
falseNorthing: See False Northing

ConversionNNPtr createChangeVerticalUnit(const util::PropertyMap &properties, const common::Scale &factor)¶

Instanciate a conversion based on the Change of Vertical Unit method.

This method is defined as EPSG:1069

Return

a new Conversion.

Parameters

properties: See general_properties of the conversion. If the name is not provided, it is automatically set.
factor: Conversion factor

ConversionNNPtr createAxisOrderReversal(bool is3D)¶

Instanciate a conversion based on the Axis order reversal method.

This swaps the longitude, latitude axis.

This method is defined as EPSG:9843, or for 3DD as EPSG:9844

Return

a new Conversion.

Parameters

is3D: Whether this should apply on 3D geographicCRS

class CoordinateOperation : public osgeo::proj::common::ObjectUsage, public osgeo::proj::io::IWKTExportable, public osgeo::proj::io::IPROJStringExportable ¶

#include <coordinateoperation.hpp>

Abstract class for a mathematical operation on coordinates.

A mathematical operation:

on coordinates that transforms or converts them from one coordinate reference system to another coordinate reference system
or that describes the change of coordinate values within one coordinate reference system due to the motion of the point between one coordinate epoch and another coordinate epoch.

Many but not all coordinate operations (from CRS A to CRS B) also uniquely define the inverse coordinate operation (from CRS B to CRS A). In some cases, the coordinate operation method algorithm for the inverse coordinate operation is the same as for the forward algorithm, but the signs of some coordinate operation parameter values have to be reversed. In other cases, different algorithms are required for the forward and inverse coordinate operations, but the same coordinate operation parameter values are used. If (some) entirely different parameter values are needed, a different coordinate operation shall be defined.

Remark: Implements CoordinateOperation from ISO_19111_2018

Subclassed by osgeo::proj::operation::ConcatenatedOperation, osgeo::proj::operation::SingleOperation

Public Functions

const util::optional<std::string> &operationVersion() const¶

Return the version of the coordinate transformation (i.e. instantiation due to the stochastic nature of the parameters).

Mandatory when describing a coordinate transformation or point motion operation, and should not be supplied for a coordinate conversion.

Return: version or empty.

const std::vector<metadata::PositionalAccuracyNNPtr> &coordinateOperationAccuracies() const¶

Return estimate(s) of the impact of this coordinate operation on point accuracy.

Gives position error estimates for target coordinates of this coordinate operation, assuming no errors in source coordinates.

Return: estimate(s) or empty vector.

const crs::CRSPtr sourceCRS() const¶

Return the source CRS of this coordinate operation.

This should not be null, expect for of a derivingConversion of a DerivedCRS when the owning DerivedCRS has been destroyed.

Return: source CRS, or null.

const crs::CRSPtr targetCRS() const¶

Return the target CRS of this coordinate operation.

This should not be null, expect for of a derivingConversion of a DerivedCRS when the owning DerivedCRS has been destroyed.

Return: target CRS, or null.

const crs::CRSPtr &interpolationCRS() const¶

Return the interpolation CRS of this coordinate operation.

Return: interpolation CRS, or null.

const util::optional<common::DataEpoch> &sourceCoordinateEpoch() const¶

Return the source epoch of coordinates.

Return: source epoch of coordinates, or empty.

const util::optional<common::DataEpoch> &targetCoordinateEpoch() const¶

Return the target epoch of coordinates.

Return: target epoch of coordinates, or empty.

virtual CoordinateOperationNNPtr inverse() const = 0¶

Return the inverse of the coordinate operation.

Exceptions

util::UnsupportedOperationException:

virtual std::set<GridDescription> gridsNeeded(const io::DatabaseContextPtr &databaseContext) const = 0¶: Return grids needed by an operation.

bool isPROJInstanciable(const io::DatabaseContextPtr &databaseContext) const¶: Return whether a coordinate operation can be instanciated as a PROJ pipeline, checking in particular that referenced grids are available.

class CoordinateOperationContext¶

#include <coordinateoperation.hpp>

Context in which a coordinate operation is to be used.

Remark: Implements [CoordinateOperationFactory https://sis.apache.org/apidocs/org/apache/sis/referencing/operation/CoordinateOperationContext.html] from Apache SIS

Public Types

enum SourceTargetCRSExtentUse¶

Specify how source and target CRS extent should be used to restrict candidate operations (only taken into account if no explicit area of interest is specified.

Values:

NONE¶: Ignore CRS extent

BOTH¶: Test coordinate operation extent against both CRS extent.

INTERSECTION¶: Test coordinate operation extent against the intersection of both CRS extent.

SMALLEST¶: Test coordinate operation against the smallest of both CRS extent.

enum SpatialCriterion¶

Spatial criterion to restrict candiate operations.

Values:

STRICT_CONTAINMENT¶: The area of validity of transforms should strictly contain the are of interest.

PARTIAL_INTERSECTION¶: The area of validity of transforms should at least intersect the area of interest.

enum GridAvailabilityUse¶

Describe how grid availability is used.

Values:

USE_FOR_SORTING¶: Grid availability is only used for sorting results. Operations where some grids are missing will be sorted last.

DISCARD_OPERATION_IF_MISSING_GRID¶: Completely discard an operation if a required grid is missing.

IGNORE_GRID_AVAILABILITY¶: Ignore grid availability at all. Results will be presented as if all grids were available.

Public Functions

io::AuthorityFactoryPtr getAuthorityFactory() const¶: Return the authority factory, or null.

metadata::ExtentPtr getAreaOfInterest() const¶: Return the desired area of interest, or null.

void setAreaOfInterest(const metadata::ExtentPtr &extent)¶: Set the desired area of interest, or null.

double getDesiredAccuracy() const¶: Return the desired accuracy (in metre), or 0.

void setDesiredAccuracy(double accuracy)¶: Set the desired accuracy (in metre), or 0.

void setSourceAndTargetCRSExtentUse(SourceTargetCRSExtentUse use)¶

Set how source and target CRS extent should be used when considering if a transformation can be used (only takes effect if no area of interest is explicitly defined).

The default is CoordinateOperationContext::SourceTargetCRSExtentUse::SMALLEST.

CoordinateOperationContext::SourceTargetCRSExtentUse getSourceAndTargetCRSExtentUse() const¶

Return how source and target CRS extent should be used when considering if a transformation can be used (only takes effect if no area of interest is explicitly defined).

The default is CoordinateOperationContext::SourceTargetCRSExtentUse::SMALLEST.

void setSpatialCriterion(SpatialCriterion criterion)¶

Set the spatial criterion to use when comparing the area of validity of coordinate operations with the area of interest / area of validity of source and target CRS.

The default is STRICT_CONTAINMENT.

CoordinateOperationContext::SpatialCriterion getSpatialCriterion() const¶

Return the spatial criterion to use when comparing the area of validity of coordinate operations with the area of interest / area of validity of source and target CRS.

The default is STRICT_CONTAINMENT.

void setUsePROJAlternativeGridNames(bool usePROJNames)¶

Set whether PROJ alternative grid names should be substituted to the official authority names.

This only has effect is an authority factory with a non-null database context has been attached to this context.

If set to false, it is still possible to obtain later the substitution by using io::PROJStringFormatter::create() with a non-null database context.

The default is true.

bool getUsePROJAlternativeGridNames() const¶

Return whether PROJ alternative grid names should be substituted to the official authority names.

The default is true.

void setGridAvailabilityUse(GridAvailabilityUse use)¶

Set how grid availability is used.

The default is USE_FOR_SORTING.

CoordinateOperationContext::GridAvailabilityUse getGridAvailabilityUse() const¶

Return how grid availability is used.

The default is USE_FOR_SORTING.

void setAllowUseIntermediateCRS(bool use)¶

Set whether an intermediate pivot CRS can be used for researching coordinate operations between a source and target CRS.

Concretely if in the database there is an operation from A to C (or C to A), and another one from C to B (or B to C), but no direct operation between A and B, setting this parameter to true, allow chaining both operations.

The current implementation is limited to researching one intermediate step.

By default, all potential C candidates will be used. setIntermediateCRS() can be used to restrict them.

The default is true.

bool getAllowUseIntermediateCRS() const¶

Return whether an intermediate pivot CRS can be used for researching coordinate operations between a source and target CRS.

Concretely if in the database there is an operation from A to C (or C to A), and another one from C to B (or B to C), but no direct operation between A and B, setting this parameter to true, allow chaining both operations.

The default is true.

void setIntermediateCRS(const std::vector<std::pair<std::string, std::string>> &intermediateCRSAuthCodes)¶

Restrict the potential pivot CRSs that can be used when trying to build a coordinate operation between two CRS that have no direct operation.

Parameters

intermediateCRSAuthCodes: a vector of (auth_name, code) that can be used as potential pivot RS

const std::vector<std::pair<std::string, std::string>> &getIntermediateCRS() const¶: Return the potential pivot CRSs that can be used when trying to build a coordinate operation between two CRS that have no direct operation.

Public Static Functions

CoordinateOperationContextNNPtr create(const io::AuthorityFactoryPtr &authorityFactory, const metadata::ExtentPtr &extent, double accuracy)¶

Creates a context for a coordinate operation.

If a non null authorityFactory is provided, the resulting context should not be used simultaneously by more than one thread.

Return

a new context.

Parameters

authorityFactory: Authority factory, or null if no database lookup is allowed. Use io::authorityFactory::create(context, std::string()) to allow all authorities to be used.
extent: Area of interest, or null if none is known.
accuracy: Maximum allowed accuracy in metre, as specified in or 0 to get best accuracy.

class CoordinateOperationFactory¶

#include <coordinateoperation.hpp>

Creates coordinate operations. This factory is capable to find coordinate transformations or conversions between two coordinate reference systems.

Remark: Implements (partially) CoordinateOperationFactory from GeoAPI

Public Functions

CoordinateOperationPtr createOperation(const crs::CRSNNPtr &sourceCRS, const crs::CRSNNPtr &targetCRS) const¶

Find a CoordinateOperation from sourceCRS to targetCRS.

This is a helper of createOperations(), using a coordinate operation context with no authority factory (so no catalog searching is done), no desired accuracy and no area of interest. This returns the first operation of the result set of createOperations(), or null if none found.

Return

a CoordinateOperation or nullptr.

Parameters

sourceCRS: source CRS.
targetCRS: source CRS.

std::vector<CoordinateOperationNNPtr> createOperations(const crs::CRSNNPtr &sourceCRS, const crs::CRSNNPtr &targetCRS, const CoordinateOperationContextNNPtr &context) const¶

Find a list of CoordinateOperation from sourceCRS to targetCRS.

The operations are sorted with the most relevant ones first: by descending area (intersection of the transformation area with the area of interest, or intersection of the transformation with the area of use of the CRS), and by increasing accuracy. Operations with unknown accuracy are sorted last, whatever their area.

Return

a list

Parameters

sourceCRS: source CRS.
targetCRS: source CRS.
context: Search context.

Public Static Functions

CoordinateOperationFactoryNNPtr create()¶: Instanciate a CoordinateOperationFactory.

class GeneralOperationParameter : public osgeo::proj::common::IdentifiedObject ¶

#include <coordinateoperation.hpp>

Abstract class modelling a parameter value (OperationParameter) or group of parameters.

Remark: Implements GeneralOperationParameter from ISO_19111_2018

Subclassed by osgeo::proj::operation::OperationParameter

Public Functions

bool isEquivalentTo(const util::IComparable *other, util::IComparable::Criterion criterion = util::IComparable::Criterion::STRICT) const = 0¶

Returns whether an object is equivalent to another one.

Return

true if objects are equivalent.

Parameters

other: other object to compare to
criterion: comparaison criterion.

class GeneralParameterValue : public osgeo::proj::util::BaseObject, public osgeo::proj::io::IWKTExportable, public osgeo::proj::util::IComparable ¶

#include <coordinateoperation.hpp>

Abstract class modelling a parameter value (OperationParameterValue) or group of parameter values.

Remark: Implements GeneralParameterValue from ISO_19111_2018

Subclassed by osgeo::proj::operation::OperationParameterValue

Public Functions

bool isEquivalentTo(const util::IComparable *other, util::IComparable::Criterion criterion = util::IComparable::Criterion::STRICT) const = 0¶

Returns whether an object is equivalent to another one.

Return

true if objects are equivalent.

Parameters

other: other object to compare to
criterion: comparaison criterion.

struct GridDescription¶

#include <coordinateoperation.hpp>

Grid description.

Public Members

std::string shortName = {}¶: Grid short filename

std::string fullName = {}¶: Grid full path name (if found)

std::string packageName = {}¶: Package name (or empty)

std::string url = {}¶: Grid URL (if packageName is empty), or package URL (or empty)

bool directDownload = false¶: Whether url can be fetched directly.

bool openLicense = false ¶: Whether the grid is released with an open license.

bool available = false¶: Whether GRID is available.

class InvalidOperation : public osgeo::proj::util::Exception ¶: #include <coordinateoperation.hpp>
Exception that can be thrown when an invalid operation is attempted to be constructed.

class OperationMethod : public osgeo::proj::common::IdentifiedObject, public osgeo::proj::io::IWKTExportable ¶

#include <coordinateoperation.hpp>

The method (algorithm or procedure) used to perform the coordinate operation.

For a projection method, this contains the name of the projection method and the name of the projection parameters.

Remark: Implements OperationMethod from ISO_19111_2018

Public Functions

const util::optional<std::string> &formula()¶

Return the formula(s) or procedure used by this coordinate operation method.

This may be a reference to a publication (in which case use formulaCitation()).

Note that the operation method may not be analytic, in which case this attribute references or contains the procedure, not an analytic formula.

Return: the formula, or empty.

const util::optional<metadata::Citation> &formulaCitation()¶

Return a reference to a publication giving the formula(s) or procedure used by the coordinate operation method.

Return: the formula citation, or empty.

const std::vector<GeneralOperationParameterNNPtr> &parameters()¶

Return the parameters of this operation method.

Return: the parameters.

bool isEquivalentTo(const util::IComparable *other, util::IComparable::Criterion criterion = util::IComparable::Criterion::STRICT) const¶

Returns whether an object is equivalent to another one.

Return

true if objects are equivalent.

Parameters

other: other object to compare to
criterion: comparaison criterion.

Public Static Functions

OperationMethodNNPtr create(const util::PropertyMap &properties, const std::vector<GeneralOperationParameterNNPtr> &parameters)¶

Instantiate a operation method from a vector of GeneralOperationParameter.

Return

a new OperationMethod.

Parameters

properties: See general_properties. At minimum the name should be defined.
parameters: Vector of GeneralOperationParameterNNPtr.

OperationMethodNNPtr create(const util::PropertyMap &properties, const std::vector<OperationParameterNNPtr> &parameters)¶

Instantiate a operation method from a vector of OperationParameter.

Return

a new OperationMethod.

Parameters

properties: See general_properties. At minimum the name should be defined.
parameters: Vector of OperationParameterNNPtr.

class OperationParameter : public osgeo::proj::operation::GeneralOperationParameter ¶

#include <coordinateoperation.hpp>

The definition of a parameter used by a coordinate operation method.

Most parameter values are numeric, but other types of parameter values are possible.

Remark: Implements OperationParameter from ISO_19111_2018

Public Functions

bool isEquivalentTo(const util::IComparable *other, util::IComparable::Criterion criterion = util::IComparable::Criterion::STRICT) const¶

Returns whether an object is equivalent to another one.

Return

true if objects are equivalent.

Parameters

other: other object to compare to
criterion: comparaison criterion.

Public Static Functions

OperationParameterNNPtr create(const util::PropertyMap &properties)¶

Instantiate a OperationParameter.

Return

a new OperationParameter.

Parameters

properties: See general_properties. At minimum the name should be defined.

class OperationParameterValue : public osgeo::proj::operation::GeneralParameterValue ¶

#include <coordinateoperation.hpp>

A parameter value, ordered sequence of values, or reference to a file of parameter values.

This combines a OperationParameter with the corresponding ParameterValue.

Remark: Implements OperationParameterValue from ISO_19111_2018

Public Functions

const OperationParameterNNPtr &parameter()¶

Return the parameter (definition)

Return: the parameter (definition).

const ParameterValueNNPtr &parameterValue()¶

Return the parameter value.

Return: the parameter value.

bool isEquivalentTo(const util::IComparable *other, util::IComparable::Criterion criterion = util::IComparable::Criterion::STRICT) const¶

Returns whether an object is equivalent to another one.

Return

true if objects are equivalent.

Parameters

other: other object to compare to
criterion: comparaison criterion.

Public Static Functions

OperationParameterValueNNPtr create(const OperationParameterNNPtr &parameterIn, const ParameterValueNNPtr &valueIn)¶

Instantiate a OperationParameterValue.

Return

a new OperationParameterValue.

Parameters

parameterIn: Parameter (definition).
valueIn: Parameter value.

class ParameterValue : public osgeo::proj::util::BaseObject, public osgeo::proj::io::IWKTExportable, public osgeo::proj::util::IComparable ¶

#include <coordinateoperation.hpp>

The value of the coordinate operation parameter.

Most parameter values are numeric, but other types of parameter values are possible.

Remark: Implements ParameterValue from ISO_19111_2018

Public Types

enum Type¶

Type of the value.

Values:

MEASURE¶: Measure (i.e. value with a unit)

STRING¶: String

INTEGER¶: Integer

BOOLEAN¶: Boolean

FILENAME¶: Filename

Public Functions

const ParameterValue::Type &type()¶

Returns the type of a parameter value.

Return: the type.

const common::Measure &value()¶

Returns the value as a Measure (assumes type() == Type::MEASURE)

Return: the value as a Measure.

const std::string &stringValue()¶

Returns the value as a string (assumes type() == Type::STRING)

Return: the value as a string.

const std::string &valueFile()¶

Returns the value as a filename (assumes type() == Type::FILENAME)

Return: the value as a filename.

int integerValue()¶

Returns the value as a integer (assumes type() == Type::INTEGER)

Return: the value as a integer.

bool booleanValue()¶

Returns the value as a boolean (assumes type() == Type::BOOLEAN)

Return: the value as a boolean.

bool isEquivalentTo(const util::IComparable *other, util::IComparable::Criterion criterion = util::IComparable::Criterion::STRICT) const¶

Returns whether an object is equivalent to another one.

Return

true if objects are equivalent.

Parameters

other: other object to compare to
criterion: comparaison criterion.

Public Static Functions

ParameterValueNNPtr create(const common::Measure &measureIn)¶

Instanciate a ParameterValue from a Measure (i.e. a value associated with a unit)

Return: a new ParameterValue.

ParameterValueNNPtr create(const char *stringValueIn)¶

Instanciate a ParameterValue from a string value.

Return: a new ParameterValue.

ParameterValueNNPtr create(const std::string &stringValueIn)¶

Instanciate a ParameterValue from a string value.

Return: a new ParameterValue.

ParameterValueNNPtr create(int integerValueIn)¶

Instanciate a ParameterValue from a integer value.

Return: a new ParameterValue.

ParameterValueNNPtr create(bool booleanValueIn)¶

Instanciate a ParameterValue from a boolean value.

Return: a new ParameterValue.

ParameterValueNNPtr createFilename(const std::string &stringValueIn)¶

Instanciate a ParameterValue from a filename.

Return: a new ParameterValue.

class PointMotionOperation : public osgeo::proj::operation::SingleOperation ¶

#include <coordinateoperation.hpp>

A mathematical operation that describes the change of coordinate values within one coordinate reference system due to the motion of the point between one coordinate epoch and another coordinate epoch.

The motion is due to tectonic plate movement or deformation.

Remark: Implements PointMotionOperation from ISO_19111_2018

class SingleOperation : public virtual osgeo::proj::operation::CoordinateOperation ¶

#include <coordinateoperation.hpp>

A single (not concatenated) coordinate operation (CoordinateOperation)

Remark: Implements SingleOperation from ISO_19111_2018

Subclassed by osgeo::proj::operation::Conversion, osgeo::proj::operation::PointMotionOperation, osgeo::proj::operation::Transformation

Public Functions

const std::vector<GeneralParameterValueNNPtr> &parameterValues()¶

Return the parameter values.

Return: the parameter values.

const OperationMethodNNPtr &method()¶

Return the operation method associated to the operation.

Return: the operation method.

const ParameterValuePtr &parameterValue(const std::string &paramName, int epsg_code = 0) const¶

Return the parameter value corresponding to a parameter name or EPSG code.

Return

the value, or nullptr if not found.

Parameters

paramName: the parameter name (or empty, in which case epsg_code should be non zero)
epsg_code: the parameter EPSG code (possibly zero)

const common::Measure &parameterValueMeasure(const std::string &paramName, int epsg_code = 0) const¶

Return the parameter value, as a measure, corresponding to a parameter name or EPSG code.

Return

the measure, or the empty Measure() object if not found.

Parameters

paramName: the parameter name (or empty, in which case epsg_code should be non zero)
epsg_code: the parameter EPSG code (possibly zero)

bool isEquivalentTo(const util::IComparable *other, util::IComparable::Criterion criterion = util::IComparable::Criterion::STRICT) const¶

Returns whether an object is equivalent to another one.

Return

true if objects are equivalent.

Parameters

other: other object to compare to
criterion: comparaison criterion.

std::set<GridDescription> gridsNeeded(const io::DatabaseContextPtr &databaseContext) const¶: Return grids needed by an operation.

Public Static Functions

SingleOperationNNPtr createPROJBased(const util::PropertyMap &properties, const std::string &PROJString, const crs::CRSPtr &sourceCRS, const crs::CRSPtr &targetCRS, const std::vector<metadata::PositionalAccuracyNNPtr> &accuracies = std::vector<metadata::PositionalAccuracyNNPtr>())¶

Instanciate a PROJ-based single operation;.

Return

the new instance

Parameters

properties: Properties
PROJString: the PROJ string.
sourceCRS: source CRS (might be null).
targetCRS: target CRS (might be null).
accuracies: Vector of positional accuracy (might be empty).

class Transformation : public osgeo::proj::operation::SingleOperation ¶

#include <coordinateoperation.hpp>

A mathematical operation on coordinates in which parameters are empirically derived from data containing the coordinates of a series of points in both coordinate reference systems.

This computational process is usually “over-determined”, allowing derivation of error (or accuracy) estimates for the coordinate transformation. Also, the stochastic nature of the parameters may result in multiple (different) versions of the same coordinate transformations between the same source and target CRSs. Any single coordinate operation in which the input and output coordinates are referenced to different datums (reference frames) will be a coordinate transformation.

Remark: Implements Transformation from ISO_19111_2018

Public Functions

const crs::CRSNNPtr &sourceCRS()¶

Return the source crs::CRS of the transformation.

Return: the source CRS.

const crs::CRSNNPtr &targetCRS()¶

Return the target crs::CRS of the transformation.

Return: the target CRS.

CoordinateOperationNNPtr inverse() const¶

Return the inverse of the coordinate operation.

Exceptions

util::UnsupportedOperationException:

std::vector<double> getTOWGS84Parameters() const¶

Return the TOWGS84 parameters of the transformation.

If this transformation uses Coordinate Frame Rotation, Position Vector transformation or Geocentric translations, a vector of 7 double values using the Position Vector convention (EPSG:9606) is returned. Those values can be used as the value of the WKT1 TOWGS84 parameter or PROJ +towgs84 parameter.

Return

a vector of 7 values if valid, otherwise a io::FormattingException is thrown.

Exceptions

io::FormattingException:

TransformationNNPtr substitutePROJAlternativeGridNames(io::DatabaseContextNNPtr databaseContext) const¶: Return an equivalent transformation to the current one, but using PROJ alternative grid names.

Public Static Functions

TransformationNNPtr create(const util::PropertyMap &properties, const crs::CRSNNPtr &sourceCRSIn, const crs::CRSNNPtr &targetCRSIn, const crs::CRSPtr &interpolationCRSIn, const OperationMethodNNPtr &methodIn, const std::vector<GeneralParameterValueNNPtr> &values, const std::vector<metadata::PositionalAccuracyNNPtr> &accuracies)¶

Instanciate a transformation from a vector of GeneralParameterValue.

Return

new Transformation.

Parameters

properties: See general_properties. At minimum the name should be defined.
sourceCRSIn: Source CRS.
targetCRSIn: Target CRS.
interpolationCRSIn: Interpolation CRS (might be null)
methodIn: Operation method.
values: Vector of GeneralOperationParameterNNPtr.
accuracies: Vector of positional accuracy (might be empty).

Exceptions

InvalidOperation:

TransformationNNPtr create(const util::PropertyMap &propertiesTransformation, const crs::CRSNNPtr &sourceCRSIn, const crs::CRSNNPtr &targetCRSIn, const crs::CRSPtr &interpolationCRSIn, const util::PropertyMap &propertiesOperationMethod, const std::vector<OperationParameterNNPtr> &parameters, const std::vector<ParameterValueNNPtr> &values, const std::vector<metadata::PositionalAccuracyNNPtr> &accuracies)¶

Instanciate a transformation ands its OperationMethod.

Return

new Transformation.

Parameters

propertiesTransformation: The general_properties of the Transformation. At minimum the name should be defined.
sourceCRSIn: Source CRS.
targetCRSIn: Target CRS.
interpolationCRSIn: Interpolation CRS (might be null)
propertiesOperationMethod: The general_properties of the OperationMethod. At minimum the name should be defined.
parameters: Vector of parameters of the operation method.
values: Vector of ParameterValueNNPtr. Constraint: values.size() == parameters.size()
accuracies: Vector of positional accuracy (might be empty).

Exceptions

InvalidOperation:

TransformationNNPtr createGeocentricTranslations(const util::PropertyMap &properties, const crs::CRSNNPtr &sourceCRSIn, const crs::CRSNNPtr &targetCRSIn, double translationXMetre, double translationYMetre, double translationZMetre, const std::vector<metadata::PositionalAccuracyNNPtr> &accuracies)¶

Instanciate a transformation with Geocentric Translations method.

Return

new Transformation.

Parameters

properties: See general_properties of the Transformation. At minimum the name should be defined.
sourceCRSIn: Source CRS.
targetCRSIn: Target CRS.
translationXMetre: Value of the Translation_X parameter (in metre).
translationYMetre: Value of the Translation_Y parameter (in metre).
translationZMetre: Value of the Translation_Z parameter (in metre).
accuracies: Vector of positional accuracy (might be empty).

TransformationNNPtr createPositionVector(const util::PropertyMap &properties, const crs::CRSNNPtr &sourceCRSIn, const crs::CRSNNPtr &targetCRSIn, double translationXMetre, double translationYMetre, double translationZMetre, double rotationXArcSecond, double rotationYArcSecond, double rotationZArcSecond, double scaleDifferencePPM, const std::vector<metadata::PositionalAccuracyNNPtr> &accuracies)¶

Instanciate a transformation with Position vector transformation method.

This is similar to createCoordinateFrameRotation(), except that the sign of the rotation terms is inverted.

Return

new Transformation.

Parameters

properties: See general_properties of the Transformation. At minimum the name should be defined.
sourceCRSIn: Source CRS.
targetCRSIn: Target CRS.
translationXMetre: Value of the Translation_X parameter (in metre).
translationYMetre: Value of the Translation_Y parameter (in metre).
translationZMetre: Value of the Translation_Z parameter (in metre).
rotationXArcSecond: Value of the Rotation_X parameter (in arc-second).
rotationYArcSecond: Value of the Rotation_Y parameter (in arc-second).
rotationZArcSecond: Value of the Rotation_Z parameter (in arc-second).
scaleDifferencePPM: Value of the Scale_Difference parameter (in parts-per-million).
accuracies: Vector of positional accuracy (might be empty).

TransformationNNPtr createCoordinateFrameRotation(const util::PropertyMap &properties, const crs::CRSNNPtr &sourceCRSIn, const crs::CRSNNPtr &targetCRSIn, double translationXMetre, double translationYMetre, double translationZMetre, double rotationXArcSecond, double rotationYArcSecond, double rotationZArcSecond, double scaleDifferencePPM, const std::vector<metadata::PositionalAccuracyNNPtr> &accuracies)¶

Instanciate a transformation with Coordinate Frame Rotation method.

This is similar to createPositionVector(), except that the sign of the rotation terms is inverted.

Return

new Transformation.

Parameters

properties: See general_properties of the Transformation. At minimum the name should be defined.
sourceCRSIn: Source CRS.
targetCRSIn: Target CRS.
translationXMetre: Value of the Translation_X parameter (in metre).
translationYMetre: Value of the Translation_Y parameter (in metre).
translationZMetre: Value of the Translation_Z parameter (in metre).
rotationXArcSecond: Value of the Rotation_X parameter (in arc-second).
rotationYArcSecond: Value of the Rotation_Y parameter (in arc-second).
rotationZArcSecond: Value of the Rotation_Z parameter (in arc-second).
scaleDifferencePPM: Value of the Scale_Difference parameter (in parts-per-million).
accuracies: Vector of positional accuracy (might be empty).

TransformationNNPtr createTimeDependentPositionVector(const util::PropertyMap &properties, const crs::CRSNNPtr &sourceCRSIn, const crs::CRSNNPtr &targetCRSIn, double translationXMetre, double translationYMetre, double translationZMetre, double rotationXArcSecond, double rotationYArcSecond, double rotationZArcSecond, double scaleDifferencePPM, double rateTranslationX, double rateTranslationY, double rateTranslationZ, double rateRotationX, double rateRotationY, double rateRotationZ, double rateScaleDifference, double referenceEpochYear, const std::vector<metadata::PositionalAccuracyNNPtr> &accuracies)¶

Instanciate a transformation with Time Dependent position vector transformation method.

This is similar to createTimeDependentCoordinateFrameRotation(), except that the sign of the rotation terms is inverted.

This method is defined as EPSG:1053

Return

new Transformation.

Parameters

properties: See general_properties of the Transformation. At minimum the name should be defined.
sourceCRSIn: Source CRS.
targetCRSIn: Target CRS.
translationXMetre: Value of the Translation_X parameter (in metre).
translationYMetre: Value of the Translation_Y parameter (in metre).
translationZMetre: Value of the Translation_Z parameter (in metre).
rotationXArcSecond: Value of the Rotation_X parameter (in arc-second).
rotationYArcSecond: Value of the Rotation_Y parameter (in arc-second).
rotationZArcSecond: Value of the Rotation_Z parameter (in arc-second).
scaleDifferencePPM: Value of the Scale_Difference parameter (in parts-per-million).
rateTranslationX: Value of the rate of change of X-axis translation (in metre/year)
rateTranslationY: Value of the rate of change of Y-axis translation (in metre/year)
rateTranslationZ: Value of the rate of change of Z-axis translation (in metre/year)
rateRotationX: Value of the rate of change of X-axis rotation (in arc-second/year)
rateRotationY: Value of the rate of change of Y-axis rotation (in arc-second/year)
rateRotationZ: Value of the rate of change of Z-axis rotation (in arc-second/year)
rateScaleDifference: Value of the rate of change of scale difference (in PPM/year)
referenceEpochYear: Parameter reference epoch (in decimal year)
accuracies: Vector of positional accuracy (might be empty).

TransformationNNPtr createTimeDependentCoordinateFrameRotation(const util::PropertyMap &properties, const crs::CRSNNPtr &sourceCRSIn, const crs::CRSNNPtr &targetCRSIn, double translationXMetre, double translationYMetre, double translationZMetre, double rotationXArcSecond, double rotationYArcSecond, double rotationZArcSecond, double scaleDifferencePPM, double rateTranslationX, double rateTranslationY, double rateTranslationZ, double rateRotationX, double rateRotationY, double rateRotationZ, double rateScaleDifference, double referenceEpochYear, const std::vector<metadata::PositionalAccuracyNNPtr> &accuracies)¶

Instanciate a transformation with Time Dependent Position coordinate frame rotation transformation method.

This is similar to createTimeDependentPositionVector(), except that the sign of the rotation terms is inverted.

This method is defined as EPSG:1056

Return

new Transformation.

Parameters

properties: See general_properties of the Transformation. At minimum the name should be defined.
sourceCRSIn: Source CRS.
targetCRSIn: Target CRS.
translationXMetre: Value of the Translation_X parameter (in metre).
translationYMetre: Value of the Translation_Y parameter (in metre).
translationZMetre: Value of the Translation_Z parameter (in metre).
rotationXArcSecond: Value of the Rotation_X parameter (in arc-second).
rotationYArcSecond: Value of the Rotation_Y parameter (in arc-second).
rotationZArcSecond: Value of the Rotation_Z parameter (in arc-second).
scaleDifferencePPM: Value of the Scale_Difference parameter (in parts-per-million).
rateTranslationX: Value of the rate of change of X-axis translation (in metre/year)
rateTranslationY: Value of the rate of change of Y-axis translation (in metre/year)
rateTranslationZ: Value of the rate of change of Z-axis translation (in metre/year)
rateRotationX: Value of the rate of change of X-axis rotation (in arc-second/year)
rateRotationY: Value of the rate of change of Y-axis rotation (in arc-second/year)
rateRotationZ: Value of the rate of change of Z-axis rotation (in arc-second/year)
rateScaleDifference: Value of the rate of change of scale difference (in PPM/year)
referenceEpochYear: Parameter reference epoch (in decimal year)
accuracies: Vector of positional accuracy (might be empty).

Exceptions

InvalidOperation:

TransformationNNPtr createTOWGS84(const crs::CRSNNPtr &sourceCRSIn, const std::vector<double> &TOWGS84Parameters)¶

Instanciate a transformation from TOWGS84 parameters.

This is a helper of createPositionVector() with the source CRS being the GeographicCRS of sourceCRSIn, and the target CRS being EPSG:4326

Return

new Transformation.

Parameters

sourceCRSIn: Source CRS.
TOWGS84Parameters: The vector of 3 double values (Translation_X,_Y,_Z) or 7 double values (Translation_X,_Y,_Z, Rotation_X,_Y,_Z, Scale_Difference) passed to createPositionVector()

Exceptions

InvalidOperation:

TransformationNNPtr createNTv2(const util::PropertyMap &properties, const crs::CRSNNPtr &sourceCRSIn, const crs::CRSNNPtr &targetCRSIn, const std::string &filename, const std::vector<metadata::PositionalAccuracyNNPtr> &accuracies)¶

Instanciate a transformation with NTv2 method.

Return

new Transformation.

Parameters

properties: See general_properties of the Transformation. At minimum the name should be defined.
sourceCRSIn: Source CRS.
targetCRSIn: Target CRS.
filename: NTv2 filename.
accuracies: Vector of positional accuracy (might be empty).

TransformationNNPtr createMolodensky(const util::PropertyMap &properties, const crs::CRSNNPtr &sourceCRSIn, const crs::CRSNNPtr &targetCRSIn, double translationXMetre, double translationYMetre, double translationZMetre, double semiMajorAxisDifferenceMetre, double flattingDifference, const std::vector<metadata::PositionalAccuracyNNPtr> &accuracies)¶

Instanciate a transformation with Molodensky method.

This method is defined as

EPSG:9604

See: createAbridgedMolodensky() for a related method.

Return

new Transformation.

Parameters

properties: See general_properties of the Transformation. At minimum the name should be defined.
sourceCRSIn: Source CRS.
targetCRSIn: Target CRS.
translationXMetre: Value of the Translation_X parameter (in metre).
translationYMetre: Value of the Translation_Y parameter (in metre).
translationZMetre: Value of the Translation_Z parameter (in metre).
semiMajorAxisDifferenceMetre: The difference between the semi-major axis values of the ellipsoids used in the target and source CRS (in metre).
flattingDifference: The difference between the flattening values of the ellipsoids used in the target and source CRS.
accuracies: Vector of positional accuracy (might be empty).

Exceptions

InvalidOperation:

TransformationNNPtr createAbridgedMolodensky(const util::PropertyMap &properties, const crs::CRSNNPtr &sourceCRSIn, const crs::CRSNNPtr &targetCRSIn, double translationXMetre, double translationYMetre, double translationZMetre, double semiMajorAxisDifferenceMetre, double flattingDifference, const std::vector<metadata::PositionalAccuracyNNPtr> &accuracies)¶

Instanciate a transformation with Abridged Molodensky method.

This method is defined as

EPSG:9605

See: createdMolodensky() for a related method.

Return

new Transformation.

Parameters

properties: See general_properties of the Transformation. At minimum the name should be defined.
sourceCRSIn: Source CRS.
targetCRSIn: Target CRS.
translationXMetre: Value of the Translation_X parameter (in metre).
translationYMetre: Value of the Translation_Y parameter (in metre).
translationZMetre: Value of the Translation_Z parameter (in metre).
semiMajorAxisDifferenceMetre: The difference between the semi-major axis values of the ellipsoids used in the target and source CRS (in metre).
flattingDifference: The difference between the flattening values of the ellipsoids used in the target and source CRS.
accuracies: Vector of positional accuracy (might be empty).

Exceptions

InvalidOperation:

TransformationNNPtr createGravityRelatedHeightToGeographic3D(const util::PropertyMap &properties, const crs::CRSNNPtr &sourceCRSIn, const crs::CRSNNPtr &targetCRSIn, const std::string &filename, const std::vector<metadata::PositionalAccuracyNNPtr> &accuracies)¶

Instanciate a transformation from GravityRelatedHeight to Geographic3D.

Return

new Transformation.

Parameters

properties: See general_properties of the Transformation. At minimum the name should be defined.
sourceCRSIn: Source CRS.
targetCRSIn: Target CRS.
filename: GRID filename.
accuracies: Vector of positional accuracy (might be empty).

TransformationNNPtr createVERTCON(const util::PropertyMap &properties, const crs::CRSNNPtr &sourceCRSIn, const crs::CRSNNPtr &targetCRSIn, const std::string &filename, const std::vector<metadata::PositionalAccuracyNNPtr> &accuracies)¶

Instanciate a transformation with method VERTCON.

Return

new Transformation.

Parameters

properties: See general_properties of the Transformation. At minimum the name should be defined.
sourceCRSIn: Source CRS.
targetCRSIn: Target CRS.
filename: GRID filename.
accuracies: Vector of positional accuracy (might be empty).

TransformationNNPtr createLongitudeRotation(const util::PropertyMap &properties, const crs::CRSNNPtr &sourceCRSIn, const crs::CRSNNPtr &targetCRSIn, const common::Angle &offset)¶

Instanciate a transformation with method Longitude rotation.

This method is defined as EPSG:9601

Return

new Transformation.

Parameters
- properties: See general_properties of the Transformation. At minimum the name should be defined.
- sourceCRSIn: Source CRS.
- targetCRSIn: Target CRS.
- offset: Longitude offset to add.

TransformationNNPtr createGeographic2DOffsets(const util::PropertyMap &properties, const crs::CRSNNPtr &sourceCRSIn, const crs::CRSNNPtr &targetCRSIn, const common::Angle &offsetLat, const common::Angle &offsetLon, const std::vector<metadata::PositionalAccuracyNNPtr> &accuracies)¶

Instanciate a transformation with method Geographic 2D offsets.

This method is defined as EPSG:9619

Return

new Transformation.

Parameters
- properties: See general_properties of the Transformation. At minimum the name should be defined.
- sourceCRSIn: Source CRS.
- targetCRSIn: Target CRS.
- offsetLat: Latitude offset to add.
- offsetLon: Longitude offset to add.
- accuracies: Vector of positional accuracy (might be empty).

TransformationNNPtr createGeographic3DOffsets(const util::PropertyMap &properties, const crs::CRSNNPtr &sourceCRSIn, const crs::CRSNNPtr &targetCRSIn, const common::Angle &offsetLat, const common::Angle &offsetLon, const common::Length &offsetHeight, const std::vector<metadata::PositionalAccuracyNNPtr> &accuracies)¶

Instanciate a transformation with method Geographic 3D offsets.

This method is defined as EPSG:9660

Return

new Transformation.

Parameters
- properties: See general_properties of the Transformation. At minimum the name should be defined.
- sourceCRSIn: Source CRS.
- targetCRSIn: Target CRS.
- offsetLat: Latitude offset to add.
- offsetLon: Longitude offset to add.
- offsetHeight: Height offset to add.
- accuracies: Vector of positional accuracy (might be empty).

TransformationNNPtr createGeographic2DWithHeightOffsets(const util::PropertyMap &properties, const crs::CRSNNPtr &sourceCRSIn, const crs::CRSNNPtr &targetCRSIn, const common::Angle &offsetLat, const common::Angle &offsetLon, const common::Length &offsetHeight, const std::vector<metadata::PositionalAccuracyNNPtr> &accuracies)¶

Instanciate a transformation with method Geographic 2D with height offsets.

This method is defined as EPSG:9618

Return

new Transformation.

Parameters
- properties: See general_properties of the Transformation. At minimum the name should be defined.
- sourceCRSIn: Source CRS.
- targetCRSIn: Target CRS.
- offsetLat: Latitude offset to add.
- offsetLon: Longitude offset to add.
- offsetHeight: Geoid undulation to add.
- accuracies: Vector of positional accuracy (might be empty).

TransformationNNPtr createVerticalOffset(const util::PropertyMap &properties, const crs::CRSNNPtr &sourceCRSIn, const crs::CRSNNPtr &targetCRSIn, const common::Length &offsetHeight, const std::vector<metadata::PositionalAccuracyNNPtr> &accuracies)¶

Instanciate a transformation with method Vertical Offset.

This method is defined as EPSG:9616

Return

new Transformation.

Parameters
- properties: See general_properties of the Transformation. At minimum the name should be defined.
- sourceCRSIn: Source CRS.
- targetCRSIn: Target CRS.
- offsetHeight: Geoid undulation to add.
- accuracies: Vector of positional accuracy (might be empty).